North County Ford - Braking and Friction
BIG Tire and Brake Event
BUY FOUR TIRES, GET A $100 REBATE
On these name brands:
Goodyear, Continental, Pirelli, Hankook Dunlop and Yokohama
Dealer-installed retail tire purchases only, limit one redemption per customer.
Purchase tires between 4/1/12 and 5/31/12. Rebate form must be submitted by 6/30/12.
See Service Advisor for vehicle applications and rebate details.
MOTORCRAFT® COMPLETE BRAKE SERVICE WITH A $40 REBATE
Brake pads or shoes
Machining rotors or drums
Labor included
Offer valid between 4/1/12 and 5/31/12 on most cars and light trucks. Front or rear axle.
Limit one redemption per axle, per customer. Rebate must be submitted by 6/30/12.
See Service Advisor for vehicle exclusions and rebate details.
Motorcraft® brake and friction parts are the only ones designed, engineered and recommended specifically for Ford, Lincoln and Mercury vehicles by Ford Motor Company. They're built with the understanding that can only come from being the Original Equipment (O.E.) manufacturer.
If you're looking for the most inexpensive brake parts, you could be compromising quality. Motorcraft® brake parts deliver high value through high quality. When you purchase Motorcraft®, you have Ford Motor Company standing behind you.
The Motorcraft® comprehensive line of brake parts includes:
- Pads and Shoes
- Super Duty Brake Pads
- Rotors and Drums
- Remanufactured Calipers:
- Unloaded (without pads)
- Loaded (with pads)
- Wheel Cylinders
- Brake Hardware Kits
- Wheel Seals
Pads and Shoes
Only Motorcraft® pads and shoes are recommended by Ford Motor Company to ensure they provide the right balance and performance for Ford, Lincoln and Mercury vehicles. Many competitive brands say they match O.E. with their use of shims, slots and chamfers to help reduce noise. But in reality, these competitive products are built according to the Friction Materials Standards Institute's (FMSI) version of the first O.E. pad and shoe specifications for each vehicle, which does not reflect the ongoing testing and improvements of Ford Motor Company. When comparing the accuracy of the FMSI specifications to Motorcraft® O.E. pads, it was clear a large percentage of O.E. part numbers had been updated since the FMSI printed their specifications book.
Motorcraft® pads and shoes:
- Are manufactured with friction formulas selected for their performance on Ford Motor Company vehicles
- Employ friction materials that have been tested to ensure they meet the stopping and fade performance requirements of the Federal Motor Vehicle Safety Standards
Super Duty Brake Pads
Engineered specifically for vehicles that are frequently exposed to high-heat and wear conditions, the new Super Duty brake pads from Motorcraft® deliver the performance and quality Ford Motor Company has made standard in all their products.
They feature:
- Original Equipment (O.E.)-quality abutment points that help reduce pad clatter/rattle and help ensure uniform pad wear.
- Advanced shim design to help reduce noise and improve adhesion between the pad and backing plate.
- Slots engineered to help improve heat and water dissipation by providing a path for gases, wear debris and water to escape from between the pad and rotor surface.
- Ford Motor Company-tested friction formulas developed specifically for Super Duty brake pads to help ensure increased fade resistance, pad life, and reduced rotor wear under the most severe, high-heat driving conditions.
- Chamfers engineered to reduce the possibility of excessive noise during severe braking and initial break-in period.
Rotors and Drums
Motorcraft® rotors and drums provide less wheel vibration and reduced new brake pedal force.
Advantages include:
- Consistent process control on the chemical composition of the U.S. iron leads to consistent hardness and strength, resulting in better long-term durability
- Maintaining strict standards on the rotor plate thickness reduces high temperature warping
- Machining all critical surfaces on the same mounting results in more parallel hub-mounting and braking surfaces. This provides more even wear over longer periods, less thickness variation and lateral run-out, which in turn means less vibration both initially and at higher mileage
- New or enlarged bolt-hole chamfers on mounting surfaces minimize concerns of rotor distortion during rotor and wheel installation
Remanufactured Unloaded Calipers (without pads)
All remanufactured calipers from Motorcraft® start with the O.E. casting. They're made of quality materials and undergo production-type testing.
All Motorcraft® remanufactured calipers receive new:
- seals
- boots
- Phenolic pistons (where originally specified)
- bleed screws and caps
- slide pins and boots (where applicable)
Remanufactured calipers undergo the same testing methodology as O.E. calipers, which includes:
- Seals tested for durability
- Boots tested for leaks
- Pistons tested for abrasion resistance
- Calipers tested for high- and low-pressure leaks
CALIFORNIA DISCLOSURE: The Internet advertising and the offers contained on this web site and applicable links are intended only for those persons who are in or who reside in the state of California.
All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charges. All units subject to prior sale. Excludes leases. All financing is on approved credit by lender. Some customers may not qualify for financing. All offers expire at midnight Pacific standard time of the day following the day of the ad. Images shown here may not necessarily represent the configurable options selected or available on a vehicle.
* Up to three payments based on $1500 cash back on 09 MY Ford and Mercury vehicles, $2,100 on 09 MY Lincoln vehicles, Expedition and Super Duty. Up to two payments based on $1,000 cash back on 10 MY Ford and Mercury vehicles (excl 10MY Mustang); $1,400 on 10MY Lincoln vehicles, Expedition and Super Duty. CUSTOMER MUST STILL MAKE ACTUAL PAYMENTS TO LENDER. Not available on Hybrid models, Mustang Shelby GT500/GT500KR, LCF and F-650/F-750. For all offers, take new retail delivery from dealer stock by 6/30/09. See dealer for complete details.
Customer Cash, Ford Credit Bonus Cash and other incentives may vary by customer residency. Please see your Ford Dealer for complete details regarding program eligibility. Ford Credit Bonus Cash is compatible with Ford Credit Financing Offer. Lease payment calculations are estimates, only, and are based on an annual mileage calculation determined by your dealer. A charge is assessed for any mileage driven that exceeds this limit. Please see your dealer for details. Actual price may vary on options, delivery fees and TT&L. Images shown may not necessarily represent the actual vehicle, the configurable options selected or available on the vehicle. Offer shown may not be available on image shown. See Dealer for residency restrictions and complete details.